The IMPAX PASS-4 and IMPAX PASS-6 Monitors use an innovative algorithm to analyze signals from a variety of analog sensors. The monitors measure the PEAK and/or AVERAGE VALUE of the signal, and compare these values to their respective upper and lower limit settings. By doing this for each machine cycle, the monitor can detect missing, broken, and dull tooling, feed problems, and other machine issues.
Unit of Measure
Specifications
Auto Learn Function |
N/A Learns Peak and Average Values Variable Cycle Count |
Peak Analysis |
N/A High and Low Fixed Limit Settings High and Low Percentage Settings |
Average Analysis |
N/A High and Low Fixed Limit Settings High and Low Percentage Settings |
Order Counter |
N/A Bad Parts Sorted/Diverted Good Parts Made Good Parts to Go Order Quantity |
Trending |
N/A Trending Data Logs for Peak & Area Trending of Average Values Trending of Peak Values |
Error Log - Last 8 Events |
N/A Count, Peak & Average Values |
Machine Stop Control |
N/A Additional Always-On Crash Protection Immediate or Delayed (configurable error tolerance) |
Sorting Control via Diverter Output |
N/A Start & Stop Delays |
Sensors Supported |
N/A 0-10V Analog Sensors 4-20mA Analog Sensors Contact PTG, Inc. for information on sensors we recommend for your application. |
Existing PASS Modules |
N/A CUSTOM PROJECTS - Hardware, software, and 0-10V sensor selection to meet your project criteria. GAGING - Up to 3 Characteristics MAINTENANCE ITEM USAGE COUNTING - Up to 18 separate Maintenance Counters METAL CUTTING - Vibration Sensor with Signal Conditioner POINTING - Motor Load Input TAPPING - Motor Load Input TEMPERATURE MONITORING - Thermocouples, Thermistors, RTDs TOOL USAGE COUNTING - Up to 40 separate Tool Counters |
Applications |
N/A Forming Metal Cutting |
